
Industrial Manufacturing Guide | October 29, 2026 | Stainless Steel Sheet, Coil and Cut Blanks for Beverage Equipment OEMs
A beverage filling machine contains more than precision filling valves. Depending on its configuration, the equipment may also include a stainless steel frame, bottle-guiding components, drip trays, splash shields, collection pans, mounting plates and washdown-resistant sheet-metal panels.
Bottle rinsing machines have their own material requirements. Rinse-water collection areas, spray-system supports, protective enclosures and bottle-handling components may be fabricated from different metal or non-metal materials.
For equipment manufacturers, these distinctions matter when purchasing stainless steel raw materials.
Types 304, 304L and 316L are potential materials for selected bottling-machine components. However, the correct grade depends on the component’s function, exposure to beverage or cleaning chemicals, fabrication method and approved equipment design.
This guide explains which components can be manufactured from stainless steel sheet, coil and strip, how to specify material standards, and what international OEM buyers should include in their steel quotation requests.
1. How Stainless Steel Enters Beverage Filling Machine Manufacturing
Beverage bottling equipment may integrate bottle rinsing, filling, capping and product transfer operations into one automated production line.
Some facilities use separate machines for each operation. Other systems combine several stations into an integrated rinser-filler-capper arrangement.
The actual design depends on the product, container type, operating method and production requirements.
Common Equipment Modules
- Bottle rinsing or cleaning stations.
- Liquid filling stations and product distribution components.
- Container guide rails and transfer assemblies.
- Drip trays and rinse-liquid collection areas.
- Splash shields and protective panels.
- Support plates and mounting brackets.
- Conveyor-related sheet-metal components.
- Access covers and maintenance panels.
Not every component requires stainless steel. Some bottle-handling elements use approved engineering plastics or other materials.
The metal grade, surface condition and processing requirements must follow the component’s actual function.
Real Equipment Construction
Industrial rotary bottle rinsers may include bottle grippers, rotating turrets, spray nozzles, infeed systems and stainless steel structural components.
Filling machines may incorporate separate product-contact parts and structural frames.
For equipment examples, see Fogg Filler Rotary Bottle Sanitizers and Rotary Rinser-Filler-Capper Equipment Construction.
These references illustrate established equipment configurations. They do not indicate that JUDE supplies steel to either equipment manufacturer.
2. Which Bottling Machine Components Can Be Made from Stainless Steel Sheet?
Sheet-metal components can be divided into product-contact, cleaning-liquid-contact and external structural or protective categories.
Each category may have different material and inspection requirements.
| Component | Potential Raw Material | Main Purchasing Requirement |
|---|---|---|
| Rinse-water collection tray | Approved stainless steel sheet | Cleaning chemistry, drainage, thickness and forming |
| Filling machine drip tray | Specified stainless steel sheet | Liquid exposure, geometry, welds and cleaning |
| Machine splash shield | Stainless sheet or another approved material | Washdown exposure, forming and installation |
| Bottle guide plate | Approved stainless sheet or formed blank | Edge quality, alignment, wear and contact function |
| Conveyor transfer plate | Stainless sheet or another specified material | Flatness, cut profile, edge finish and fastening |
| Nozzle mounting plate | Specified stainless sheet or plate | Hole geometry, structural loads and alignment |
| Support bracket | Approved sheet, strip or plate | Thickness, geometry, loading and weld preparation |
| Protective machine enclosure | Stainless sheet or another approved panel material | Environmental exposure, appearance and fabrication |
| Product distribution line | Design-specified sanitary tubing and fittings | Product standard, cleanliness, surface and joining |
These are illustrative material applications. They are not a certified bill of materials for a particular bottling machine.
Precision filling valves, pump components, shafts and other machined parts may require different manufacturing materials and product standards.
They should not automatically be included in a quotation for stainless steel sheet.
3. Product-Contact and Non-Product-Contact Stainless Steel
One of the most important purchasing distinctions is whether a component directly contacts the beverage.
A filling valve carrying the product is not subject to the same functional requirements as a protective enclosure surrounding the equipment.
Direct Product-Contact Components
These components contact beverages during normal production.
Examples may include appropriately designed filling paths, wetted parts, product-contact manifolds or other approved liquid-contact surfaces.
Material selection must consider:
- Beverage composition and acidity.
- Operating and cleaning temperatures.
- Contact with sugars, salts or other ingredients.
- Cleaning agents and sanitizers.
- Final surface condition and weld quality.
- Hygienic design and applicable food-contact requirements.
A stainless steel material certificate alone does not prove that a completed product-contact component meets all applicable hygiene requirements.
Rinse-Liquid-Contact Components
Rinse-water trays and certain bottle-rinsing components may contact water or cleaning solutions rather than the beverage itself.
However, their design can still influence cleanliness, drainage and contamination risks.
Water quality, cleaning chemicals and equipment maintenance should be considered when approving materials.
External Structural and Protective Components
Protective covers, machine frames, access panels and external brackets may experience moisture, washdown chemicals and mechanical loading.
Where these parts do not directly contact the beverage, their material and surface specifications may differ from those of the product-contact system.
It is therefore unnecessary to assume that every machine panel must use the most highly alloyed grade in the equipment.
4. Comparing 304, 304L and 316L Stainless Steel
Types 304, 304L and 316L belong to the austenitic stainless steel family, but their chemical specifications and metallurgical characteristics differ.
| Grade | UNS | Common EN Designation | Main Material Characteristic |
|---|---|---|---|
| 304 | S30400 | 1.4301 | General chromium-nickel austenitic stainless steel |
| 304L | S30403 | 1.4307 | Low-carbon chromium-nickel stainless steel |
| 316L | S31603 | 1.4404 | Low-carbon molybdenum-bearing stainless steel |
These are commonly used grade references. They do not establish complete equivalence between every ASTM, EN, JIS or other product standard.
304 Stainless Steel
Type 304 is used in many industrial fabrication applications where its strength, corrosion resistance and manufacturing characteristics satisfy the design.
It may be considered for selected filling-machine covers, guide plates, collection trays and other components in compatible environments.
However, 304 should not be assumed suitable for every cleaning chemical, high-chloride environment or food-contact application.
304L Stainless Steel
304L contains a lower specified maximum carbon content than conventional 304.
Its low-carbon specification can help reduce susceptibility to sensitization-related intergranular corrosion during certain welding and thermal exposures.
It may be relevant to fabricated equipment components where the approved design requires this characteristic.
Nevertheless, 304L is not automatically more resistant than 304 to every cleaning solution or corrosion mechanism.
316L Stainless Steel
316L contains molybdenum and generally offers improved resistance to certain forms of localized corrosion compared with 304 in many relevant environments.
It may be specified for selected liquid-contact and fabricated equipment components when the actual service conditions justify its use.
However, 316L can still experience pitting, crevice corrosion and chloride stress-corrosion cracking.
Higher alloy content does not automatically make a component hygienically compliant or immune to cleaning-chemical damage.
For grade and product information, see JUDE Stainless Steel Grade Overview.
5. Stainless Steel Standards for Bottling Equipment Raw Materials
A stainless steel purchase order should identify both the alloy grade and the applicable product standard.
Flat steel products and sanitary tubing are governed by different requirements.
| Standard | Material Scope | Potential Application |
|---|---|---|
| ASTM A240/A240M-26 | Specified stainless steel plate, sheet and strip | Sheet-metal components and approved cut blanks |
| ASTM A480/A480M-25b | General requirements for applicable flat-rolled stainless products | Dimensions, tolerances and delivery requirements |
| EN 10088-2:2024 | Relevant corrosion-resistant stainless flat products | Sheet, plate and strip for general fabrication |
| ASTM A270/A270M-24 | Specified seamless and welded sanitary stainless steel tubing | Approved food and beverage transfer tubing |
ASTM A240/A240M for Sheet and Plate
ASTM A240/A240M covers applicable stainless steel plate, sheet and strip for pressure-vessel and general applications.
A purchaser should specify the steel grade, thickness, dimensions, delivery condition and any supplementary requirements.
Conformity to ASTM A240 does not independently certify a completed bottle rinser, filling machine or food-contact assembly.
Official standard: ASTM A240/A240M-26.
ASTM A480/A480M General Requirements
ASTM A480/A480M contains general requirements applicable to specified flat-rolled stainless steel products.
Purchasing documents should state the applicable dimensional requirements, units, finish and relevant supplementary conditions.
Official standard: ASTM A480/A480M.
EN 10088-2 Stainless Steel Flat Products
EN 10088-2:2024 covers the technical delivery conditions for specified corrosion-resistant stainless steel sheet, plate and strip for general purposes.
It may be relevant to suitable flat products used in food equipment fabrication, but does not establish the compliance of a finished food-processing machine.
Official reference: EN 10088-2:2024.
6. Stainless Steel Components in Bottle Rinsing Machines
Bottle rinsing equipment may use water, air or other approved rinsing media, depending on the process and container type.
Some rotary configurations move bottles through rinsing positions using specialized handling and nozzle systems.
The material requirements of these systems depend on the actual design.
Rinse-Water Collection Trays
A rinse-water collection tray may be fabricated from stainless steel sheet using cutting, bending and welding.
The design should consider drainage, cleaning access, operating loads and the compatibility of the selected material with the rinsing medium.
For raw-material purchasing, the equipment manufacturer may specify:
- Approved stainless steel grade.
- Required sheet or plate product standard.
- Starting thickness and dimensional tolerance.
- Flat-pattern dimensions and bend geometry.
- Drain holes and connection features.
- Surface and edge condition.
- Required material identification and certification.
Spray-System Mounting Plates
Some rinsing systems contain structural supports for spray nozzles, fluid connections or related components.
Where these supports are fabricated from sheet or plate, their dimensions must follow the approved assembly drawing.
Hole locations, stiffness, corrosion exposure and connection details may be more important than the nominal sheet finish alone.
The plate material must not be treated as proof of the complete spray system’s performance.
Protective Covers and Splash Shields
Metallic covers may help protect machine components from external splashing and provide access for maintenance.
Depending on the design, stainless steel sheet may be suitable for these components.
The purchaser should specify the required material, flat dimensions, bending, attachment holes and surface finish.
Other approved materials may also be appropriate for particular protective covers.
7. Stainless Steel Sheet Components in Beverage Filling Machines
Beverage filling machines may contain product-contact valves, filling heads, distribution components and structural or protective sheet-metal parts.
The raw-material requirements differ according to whether the component carries the beverage, supports the mechanism or protects the equipment.
Drip Trays and Collection Pans
Drip trays may be positioned under certain filling or transfer locations to collect spilled liquid.
Their material should be compatible with the beverage residues, cleaning agents and local operating conditions.
Important manufacturing details can include slope, drainage openings, welded corners and access for cleaning.
The raw sheet material alone does not establish that the finished tray is drainable or easy to clean.
Guide Plates and Bottle Transfer Components
Bottle transfer arrangements may contain guide plates or other metallic components used to position containers.
Some parts may be produced from stainless steel sheet or strip, while others use polymers or specially machined components.
Where stainless sheet is approved, the buyer should identify:
- Material grade and thickness.
- Finished geometry and applicable tolerances.
- Edge profile and burr acceptance.
- Mounting holes and slots.
- Surface and cleaning requirements.
- Required flatness or forming characteristics.
A steel supplier should not assume that the purchase includes a complete bottle-handling assembly merely because guide-plate blanks are requested.
Machine Frames and External Covers
Selected machine frames, brackets and covers may use stainless steel or other specified structural materials.
These components may have different corrosion, appearance and loading requirements from the product-contact system.
The engineering design must determine the material grade and section dimensions.
Precision Filling Heads
Filling heads and valves may require precision-machined components, specially formed passages, seals or other parts that are not manufactured directly from flat stainless sheet.
Where these items are included in an RFQ, the buyer should identify the required product form separately.
JUDE’s published sheet and coil products should not be presented as completed precision filling valves.
8. Why 2B Surface Finish Is Not a Hygienic Certification
Cold-rolled stainless steel sheet is available in various surface conditions, including 2B.
2B refers to a defined flat-product surface finish. It does not certify the final hygienic condition of a completed beverage filling machine.
Fabrication Changes the Surface
Cutting, bending and welding may alter the local surface condition.
Where hygienic acceptance is required, the manufacturer should evaluate the final fabricated component, including welds, edges, crevices and areas that may retain product residues.
Surface Roughness Requirements
If a project requires a specific surface roughness, the relevant parameter, measurement method, location and acceptance criteria should be stated in the technical specification.
A single roughness value should not be applied universally to all bottling equipment components.
Non-product-contact covers and product-contact surfaces may have very different finishing requirements.
Hygienic Design Guidance
The European Hygienic Engineering & Design Group publishes guidance covering hygienic equipment design, welding, cleaning, food-processing environments and packaging machinery.
These guidelines help manufacturers address equipment-level considerations beyond material chemistry.
Read the EHEDG Guideline Catalogue.
Referencing EHEDG guidance does not mean that JUDE raw materials or any finished machine described in this article are EHEDG-certified.
9. Sanitary Tubing Is Different from Stainless Sheet
Some beverage filling machines use product transfer lines, filling manifolds or cleaning-system connections made from stainless tubing.
These requirements should be separated from sheet-metal orders.
ASTM A270/A270M
ASTM A270/A270M-24 covers specified seamless, welded and heavily cold-worked welded austenitic and ferritic/austenitic sanitary stainless steel tubing.
The specification is intended for relevant dairy and food industry applications and addresses particular product and surface requirements.
For a sanitary tubing enquiry, a buyer should identify:
- Approved tube product standard and grade.
- Outside diameter and wall thickness.
- Manufacturing route and delivery condition.
- Required inside and outside surface condition.
- Length and dimensional tolerances.
- Required inspection and material certification.
- Joining and hygienic requirements of the finished assembly.
Ordinary stainless steel pipe should not automatically be substituted for sanitary tubing.
Likewise, conformity of sanitary tubing does not independently certify the completed filling or cleaning system.
Official standard: ASTM A270/A270M-24.
10. Fabrication Requirements for Stainless Steel Sheet-Metal Parts
Equipment manufacturers may order full sheets, slit coil, rectangular blanks or drawing-based cut pieces.
The purchasing format should match the intended manufacturing process and production quantity.
Cut-to-Size Sheet and Blanks
For repeated production of drip trays, mounting panels and covers, purchasing pre-cut blanks may reduce some in-house material preparation operations.
However, the actual cost benefit depends on nesting, scrap, processing charges, shipping and the manufacturer’s production workflow.
JUDE publishes Custom Shearing and Laser Cutting services.
Available cutting sizes, tolerances and processing feasibility must be confirmed against the exact drawing and material.
Bending and Forming
Sheet-metal drip trays, protective covers and certain guide components may require bends or formed edges.
Stainless steel forming behavior depends on grade, thickness, supply condition, bend radius and tooling.
The approved flat pattern should account for the intended bending process.
For related processing information, see JUDE Stainless Steel Bending.
Coil and Strip Supply
For repeated narrow components, stainless steel strip may be an appropriate starting material.
Buyers should confirm required thickness, slit width, edge condition, coil weight and coil inside diameter.
JUDE publishes stainless strip and strip processing services, including a general strip-stock thickness range of 0.3-6.0 mm.
Availability of the exact grade, width, thickness and surface condition must be verified before quotation.
See JUDE Stainless Steel Strip and Stainless Steel Strip Processing.
Welding and Final Surface Condition
Welded trays and other fabricated equipment components may require additional surface treatment and inspection.
For parts exposed to frequent cleaning, the approved manufacturing procedure should consider weld condition, surface contamination and local corrosion risks.
Material supply and sheet cutting should not be confused with final assembly welding or hygienic qualification.
11. Material Inspection and Traceability
A bottling equipment workshop may purchase several stainless steel grades for different components.
Maintaining material identification is important when similar-looking sheets are stored, cut and processed together.
Incoming Steel Inspection
- Confirm material grade and product standard.
- Review the required mill test certificate.
- Verify thickness and dimensional tolerances.
- Check surface and edge conditions.
- Confirm heat or batch identification where required.
- Review delivery condition and processing requirements.
- Perform additional testing where specified.
Traceability After Cutting
One stainless steel sheet may be cut into numerous machine panels, guide plates or brackets.
When traceability is required, the manufacturer’s identification-transfer procedure should link the resulting blanks to the original material and purchase records.
Drawings, part numbers and revision records should also remain controlled throughout production.
Positive Material Identification
Portable alloy identification methods can help detect some material mix-ups where the method is suitable.
However, conventional handheld X-ray fluorescence cannot directly determine the low carbon content distinguishing 304L from 304.
If independent carbon verification is specified, the purchaser should require an appropriate analytical method.
Material identity testing does not replace complete product-standard certification or finished-equipment acceptance.
12. Common Purchasing Mistakes in Beverage Equipment Manufacturing
Mistake 1: Ordering Every Component as 316L
Not every sheet-metal component contacts the beverage or the same cleaning chemicals.
Material selection should be based on the approved function and exposure of each component rather than a blanket grade assumption.
Mistake 2: Ordering by Grade Without a Product Standard
A request for “304 stainless steel sheet” may omit essential details such as the governing standard, thickness, finish, delivery condition and dimensional tolerances.
These requirements should be included in the material schedule.
Mistake 3: Treating 304L as an Automatic Replacement for 304
304L has different carbon and potentially different mechanical-property requirements.
A material substitution must be approved against the component’s actual design and product specification.
Mistake 4: Assuming 2B Means Hygienically Approved
The 2B finish of the original sheet does not independently establish the final surface condition or cleanability of a fabricated machine component.
Mistake 5: Ordering Cut Blanks Without Drawings
Drip trays, guide plates and mounting brackets may require controlled dimensions, holes, bend positions and edge conditions.
Purchasing without an approved drawing can lead to manufacturing and inspection disputes.
Mistake 6: Confusing Sheet Metal with Finished Filling Heads
Precision filling heads may require separate machining, assembly and testing beyond flat steel supply.
The material supplier’s scope should be clearly identified in the quotation.
Mistake 7: Assuming Raw Material Certification Means Equipment Certification
An ASTM-compliant steel sheet does not establish the safety, hygienic performance, filling accuracy or cleaning effectiveness of a complete bottling line.
Those requirements must be demonstrated through the finished equipment’s applicable design and acceptance procedures.
13. Illustrative Steel BOM for Filling and Rinsing Machine OEMs
The following bill of materials is a procurement template rather than a certified equipment specification.
| Item | Equipment Component | Potential Material | Required RFQ Information |
|---|---|---|---|
| 01 | Bottle rinse collection tray | Approved stainless sheet | Grade, standard, thickness, dimensions and bending |
| 02 | Filler drip tray | Specified stainless sheet | Grade, cut profile, drain geometry and surface condition |
| 03 | Machine splash shield | Stainless sheet or approved alternative | Material, flat pattern, bends and mounting holes |
| 04 | Bottle guide plate | Approved sheet or cut blank | Grade, thickness, profile, edge quality and tolerance |
| 05 | Conveyor transfer plate | Specified stainless sheet | Flatness, cut geometry and mounting requirements |
| 06 | Nozzle mounting panel | Approved stainless sheet or plate | Thickness, hole positions, loads and drawing |
| 07 | Protective access cover | Stainless sheet or another approved material | Surface, bends, dimensions and connection details |
| 08 | Product-transfer tubing | Specified sanitary stainless tubing | Tube standard, grade, OD, wall, surface and testing |
| 09 | Replacement steel blank | Drawing-based sheet or strip | Part number, revision, grade and quantity |
All material specifications must be consistent with the manufacturer’s approved design and applicable equipment requirements.
14. What Should an OEM Include in a Stainless Steel RFQ?
International equipment manufacturers should provide a component-level purchasing schedule to avoid confusion between raw materials, processed blanks and finished machine components.
For Stainless Steel Sheet and Coil
- Approved grade: 304, 304L, 316L or another specified material.
- Required ASTM, EN or other product standard and edition.
- Nominal thickness and dimensional tolerance.
- Sheet width and length or coil width.
- Surface and delivery condition.
- Requested total quantity.
- Material certificate and inspection requirements.
For Cut and Bent Parts
- Component part number and drawing revision.
- Required starting material grade and thickness.
- Flat-pattern dimensions and cut profile.
- Hole positions and tolerances.
- Bend radii, angles and directions.
- Edge and surface requirements.
- Quantity by drawing.
- Scope of cutting, bending and other processing.
Commercial Information
- Purchasing company and equipment application.
- Trial order or repeat-production quantity.
- Required material documentation.
- Packaging and protective-film requirements.
- Destination country, city or port.
- Requested delivery terms and schedule.
- Any relevant trade or end-use restrictions.
15. Sample Stainless Steel Material RFQ Email
Subject: RFQ – 304 / 304L / 316L Stainless Steel Sheet for Beverage Filling and Bottle Rinsing Equipment
Dear JUDE Steel Sales Team,
We manufacture beverage filling and bottle rinsing equipment and are sourcing stainless steel raw materials for our production program.
Our material requirements include sheet and coil for machine panels, rinse collection trays, filler drip trays, guide plates, mounting brackets and other approved fabricated components.
Please review the attached material BOM and component drawings.
For each item, please confirm the available stainless steel grade, product standard, thickness, width, surface condition and material documentation.
For drawing-based blanks, please quote the required cutting, bending or other agreed processing separately from the raw material where appropriate.
Please clearly identify whether the offer covers full sheets, slit coil, cut blanks or additional fabrication.
Any proposed material substitution or deviation from the approved drawings must be submitted for our engineering approval.
Please provide material availability, quotation validity, inspection documentation, packing details, lead time and delivery terms.
Best regards,
Equipment Procurement Department
16. Frequently Asked Questions
1. What stainless steel is used for beverage filling machine components?
Depending on the approved design, selected components may use 304, 304L, 316L or other suitable materials. Grade selection depends on beverage contact, cleaning chemistry, corrosion conditions, manufacturing and mechanical requirements.
2. Is 304 stainless steel suitable for bottle rinsing equipment?
304 may be appropriate for selected parts when the rinse medium, cleaning chemicals and equipment design are compatible. It should not be assumed suitable for every rinsing or sanitizing process.
3. Does every beverage filling machine require 316L?
No. Different parts have different functions and exposure conditions. Some approved machine components may use 304, while other components require 316L or different materials.
4. When would an equipment manufacturer specify 304L?
304L may be specified where its low-carbon characteristics are relevant to approved welding or thermal conditions. It is not an automatic replacement for every 304 component.
5. Can JUDE supply stainless sheet for bottle rinser drip trays?
JUDE publishes stainless steel sheet, coil and selected processing services. Buyers can submit the approved grade, thickness, dimensions, drawings and quantities for material availability and processing-feasibility review.
6. Is a 2B sheet surface automatically suitable for food-contact equipment?
No. 2B describes an incoming material finish. Finished equipment suitability depends on the actual contact conditions, fabrication, surface treatment, cleaning requirements and applicable regulations.
7. Can stainless steel guide plates be laser cut?
Laser cutting is a possible manufacturing process for suitable approved sheet blanks. The actual grade, thickness, geometry, edge requirements and inspection tolerances must be reviewed before processing.
8. Does ASTM A240 certify a completed filling machine?
No. ASTM A240/A240M concerns specified stainless steel flat products. Finished filling machines require separate engineering, manufacturing, safety and hygiene-related acceptance.
9. Can ordinary stainless steel pipe replace sanitary tubing?
Not automatically. Sanitary tubing may require different material, manufacturing, surface and inspection conditions. Any substitution must be approved against the complete technical specification.
10. Is 316L completely resistant to cleaning chemicals?
No. 316L can be affected by certain cleaning chemicals and operating conditions. Compatibility should be assessed using the actual concentration, temperature, contact time and cleaning procedure.
11. Can JUDE manufacture ready-to-install bottle rinsing machines?
JUDE publicly offers stainless steel raw materials and selected processing services. Manufacture and certification of complete bottle rinsing machines or filling lines are separate capabilities and should not be assumed from its steel catalogue.
12. What is required for a repeat-production sheet-metal order?
The buyer should supply approved component drawings, material grades, product standards, dimensions, tolerances, surface conditions, expected quantities and material identification requirements.
17. Request Stainless Steel Sheet and Cut Blanks from JUDE
304, 304L and 316L Stainless Steel Raw Materials for Beverage Filling and Bottle Rinsing Machine Manufacturers
JUDE Steel supplies stainless steel sheet, coil and strip products for industrial fabrication and international OEM procurement.
Manufacturers of beverage filling, bottle rinsing and automated packaging equipment can submit their approved stainless steel material schedules for availability and processing review.
Relevant JUDE stainless steel products:
- Stainless Steel Sheet and Plate
- Stainless Steel Coil
- Stainless Steel Strip
- Stainless Steel Grade Overview
Relevant material processing services:
To receive a quotation, please send:
- Approved 304, 304L, 316L or other required grade.
- Full material product standard and edition.
- Required sheet or strip thickness.
- Sheet width, length or coil dimensions.
- Surface and delivery requirements.
- Flat-pattern drawings for cut components.
- Quantity and intended production schedule.
- Required material test certificates.
- Destination country and delivery terms.
Contact JUDE Steel International Sales: Request a Stainless Steel Material Quotation.
Email your BOM and technical drawings: support@jiscojude.com.
Please identify whether your enquiry concerns raw sheet, slit coil, cut blanks or additional processing.
Actual product availability, processing capability, tolerances, inspection documents, prices and delivery options will be confirmed through a formal quotation.
JUDE raw-material supply does not establish the manufacture or certification of complete beverage filling or bottle rinsing equipment.
18. Industry and Technical References
- Fogg Filler – Rotary Bottle Rinsing Equipment.
- US Packaging Equipment – Rotary Rinser-Filler-Capper Construction.
- ASTM A240/A240M-26 – Stainless Steel Plate, Sheet and Strip.
- ASTM A480/A480M – General Requirements for Flat-Rolled Stainless Steel.
- ASTM A270/A270M-24 – Stainless Steel Sanitary Tubing.
- EN 10088-2:2024 – Stainless Steel Flat Products.
- EHEDG – Hygienic Engineering and Design Guidelines.
Technical notice: This article provides general stainless steel raw-material selection and procurement guidance for beverage filling and bottle rinsing equipment. It is not a hygienic design certification, food-contact compliance declaration, corrosion-life guarantee, filling-accuracy specification or completed equipment approval.
Final material selection, component design, welding, surface finishing, cleaning validation, inspection and equipment acceptance must follow the approved engineering documents and applicable regulatory requirements.
The component examples are illustrative and do not represent the approved BOM of any named equipment manufacturer. No supply relationship with referenced equipment manufacturers is implied.
Specific steel grades, dimensions, processing services, certificates, prices and international delivery options must be confirmed for each quotation.